HTPC build 2011 part 3/3

Finally, for the motherboard and RAMs. As I don't OC the CPU or anything, it will be better to use H67 chipset compared to Z68 or P67. Also, I was also particular about the board layout, design etc. Having heatsinks on the VRM is a must for me since I feel it will prolong the life of it. Also, I will not be using a K series CPU since I don't overclock, a i5 2400 should suffice for me for my budget.

After all the researching on the different MB brands, I narrowed down to ECS (H67H2-M) or ASUS (P8H67-M EVO). Comparing both of them, they both look good with their individual colour themes and their VRM heatsinks.

ECS is lower cost and short of internal 1394 header and crossfire but ASUS has almost everything on the the board from 1394 (obsolete soon I feel) to crossfire. It even has a 2-port USB and eSATA module compared to ECS only has eSATA module. Of course, the price difference is there.

I wanted the ECS due to cost but the shop (lowest priced among all the shops) that I went to is out of stock for ECS. After some consideration, I decided to get the Asus board instead. And I am pretty happy with it.

Below is my unboxing video:

P8H67-M EVO unboxing

The pictures:

 Contents

 View 1

 View 2

 View 3

View 4

Lastly for the RAMs, as I don't overclock and with H67 chipset, I am limited to 1066 or 1333 rams. It is either Kingston or G-skill value rams for me. I choose the G-skill as it cost lower than Kingston and I shouldn't see any real world difference in them.

The PCB is black compared to Green for Kingston. I bought 2 sticks of 4GB each and it adds up to 8GB. It should be more than enough for Windows 7.

The picture:

G-skill value rams

For my future upgrades, I will be getting a Graphics card, maybe some fans and maybe even more RAMs if the price is good. It is a pity that my old fans can't be used due to size. Will do a post once I bought the stuffs.

Pictures of my HTPC build:

 My HTPC

 i5 2400

 Contents of i5 2400

 nice copper base

 low height

 Comparison with kozuti

 Mount nicely

 Clear VRM heatsinks

 Fans transfer

Assembling

 Close up

Completed

As you can see, the cable management is pretty messy. If you wish to have a neater management, I guess a modular PSU will be more useful but the length of the PSU will be slightly longer.